Irma on the Mind???

Current position [18.5 N / 45.9 W]

First thing first. there is still A LOT of variation that can occur 7 days out! So this briefing isn’t to serve as a forecast, but as an explanation as to the components in play.



For the last few days, we’ve been waiting to see how far S and W Irma’s trajectory would dip. Like a ball that must bounce downwards before it bounces upwards, we’ve been closely watching the expected S and W dip that Irma is undergoing this weekend. The system is expected to begin it’s more northward trajectory on Mon/Tue, and therefore a narrowing of potential outcomes will only begin then. And no that doesn’t mean the final answer will appear, but a better picture will be revealed.

Now that WSW motion is indeed in place, but it initiated slightly higher north than previously modeled. A hurricane’s position is a result of the eye location, and to put it plainly, Irma’s been acting pretty shifty-eyed. The reason for this is the multiple occurrences of EWRC [eye-wall replacement cycles]: This is when a larger eye forms around an established eye. The larger eye “chokes” off the necessary moisture and the inner eye collapses. This process does weaken or prohibits further intensification during the process, but it is usually followed by a re-strengthening once the process is complete. So if the location of the eye is slightly changing, then it stands to reason that the point of where we measure it’s S and W movement also shifts.

If you’re following the models, remember that one release does NOT indicate certainty. You’re looking for consistency from run-to-tun. The GFS (American model) comes out 4 times a day. The European model is released twice a day.

Now as mentioned prior, there are many variables that will affect the trajectory of this system: The position of a high pressure located N/NE of the system, an upper level low located to the NW of the system, high and low pressure placement over the U.S. 6-8 days from now, and Irma’s interaction with any landmasses along the way or regions of increased wind shear [how winds change with height].

Three major factors are behind Irma’s current intensity, with the first two working against:
1) Its location in a region of cooler SST’s [sea surface temperatures], but by only about 1-2 degrees cooler than what’s consider tropical fuel.
2) Drier air ahead of the system is slightly wrapping into the inner regions, which dampens cloud/thunderstorm development.

But in the ‘ole gal’s favor is that its in a region of
3) Weaker vertical wind shear of about [10-15 kts] is a hurricane’s dream, as it does not destroy the thunderstorms from building vertically but still provides enough shift to keep the circulation in place.

But….Irma is moving into a region of higher SST’s (pro), moister (pro) air, and higher shear (con).
Considering all involved, further intensification is likely.

OUTCOME: For those in the U.S, take a deep breath, and consider tightening up your hurricane plans, because come next week, the time will come to either 1) pull the trigger or 2) exhale and consider yourself to have conquered yet another week during the 2017 Atlantic Hurricane Season.

But if you’re asking, “What would YOU do”, well, on this end, supplies are in place; because why not. Because what better way to actually relax this labor day weekend than to know whatever happens next week, as the picture sharpens, things are in place now. [Think of people who waited until the last minute to find solar eclipse glasses; how well did that work out?]

So, stay tuned, stay aware, and DO NOT buy into the hype anytime over the next 2 days.


For latest satellite animation, visit us on FB: 


Lessons from El Faro: Forecasts Can’t Guarantee Safety

See the latest Weather Forecast Solutions article at The Maritime Executive magazine about the recently released National Transportation Safety Board report on weather findings surrounding the 2015 sinking of the El Faro during Hurricane Joaquin.

Weather Forecasts Alone Can’t Guarantee Safety

Hurricane Joaquin (USCG / NOAA)

The Six Ingredients for Hurricane Formation

As we approach the 2017 Atlantic Hurricane Season [Jun 01-Nov 30], observing the sea surface temperatures [SST] indicates the “hot spots”, no pun intended, for hurricane development/intensification.  By the way, the term “hurricane” is synonymous with cyclone and typhoon, with the only difference being where they are geographically located:  Hurricanes refer to tropical cyclones located in the Atlantic and Eastern Pacific Ocean, typhoons are tropical cyclones located in the Central and Western Pacific waters. And the Indian and South Pacific Ocean basins simply refer to them by their general name, cyclones.

While SST values are one of the important determining factors to observe, cyclogenesis [the birth of a cyclone] requires a specific set of conditions to be in place in order for actual development/intensification to occur.  Let’s dissect these 6 major ingredients to fully understand the complexity of one of nature’s most powerful systems.

1.  Sea surface temperatures [SST]:  Minimum SST of 26.5 °C [79.7 °F] is necessary to provide enough heat content to “fuel” the system.  This temperature needs to be distributed through at least 50 meters [164 ft] in ocean depth.  According to Richard A. Dare and John L. McBride of the Centre for Australian Weather and Climate Research, Bureau of Meteorology in Melbourne, Australia, 98.3% of global cyclone formation occurs when SST values exceeding 25.5°C [77.9 °F].  So while meteorologists may watch thunderstorms pumping off the African Coast in anticipation of cyclone development, until there is sufficient water temperatures to fuel future development, the thunderstorm moves offshore and remains just a thunderstorm out to sea.

Atlantic Ocean basin sea surface temperatures [SST} for March 21, 2017.

2. Unstable Atmosphere/Vertical Motion: An unstable atmosphere is defined by one in which warm air continues to rise until it finds itself surrounding by air of an identical temperature. Once it finds its “home base”, this is what is known as equilibrium.  So what causes this warm air to rise?  The answer lies within the density differences between warm and cold air. Say what now?  Did things just get all science-y up in here? Well, imagine you were in a 10’ x 10’ room in the middle of a Siberian winter, with no heat; you would want to fill this room with as many people as possible to keep warm, stuffing person after person into the space to capitalize on the generated body heat.  Now imagine the same 10’ x 10’ room is located in the middle of hot Texas summer day with no A/C available; you would want to kick many of these people out of this room, ultimately to keep as much distance between yourself and any other heat generating individuals.  Now exchange people for molecules, and the idea of air density should be getting clearer; more people (molecules) in the room (air) makes the room weigh more, less people (molecules) in the same room (air) make the room weigh less.   Now you may remember that density was the amount of mass per given volume.  So, while the volume of the room stays the same, the amount of molecules (people) is what differs.  And there you have it, cold air is denser than warm air, therefore explaining why the warm air continues to rise until it achieves equilibrium.  Wow, things are getting heavy around here.

Provided there is adequate moisture present in the atmosphere, this rising warm air and moisture combine work in tandem to develop clouds.  If the rising motion continues unchecked, this will allow the clouds to continue building vertically, which now has the potential for thunderstorms.

Instability_with arrows and explanation

3.  Relative Humidity [RH]: Relative humidity is the amount of moisture available in the atmosphere, compared to how much it could fully hold [100% humidity].  High values of RH need to be present from the lower to middle portions of the atmosphere. So how much is enough?  Low values of RH cannot support cloud/thunderstorm development, and the 50% threshold of RH is borderline at best, whereas 70% and above is considered prime RH values.

4. Preexisting condition: It may begin as a simple thunderstorm, but some form of a disturbance or an area of lower pressure relative to its surroundings is the bullet to the trigger.  If a disturbance has any chance of developing into something more, it must develop or migrate into a region of the above mentioned factors.

5. Wind Shear: Wind shear is defined as the change in wind speed/direction with height.  These changes in wind direction with height must be enough to sustain a counterclockwise flow [low pressure’s spin counterclockwise in the Northern Hemisphere], but not too strong or it may move the heat and moisture away from the center of the system and essentially destroy the vertical integrity of the cloud column.

6.  Coriolis Force: This is a biggie.  This force, as a result of the earth’s rotation, induces motion to the right [Northern Hemisphere] and to the left in the Southern Hemisphere [think of launching missiles.  You don’t aim at the target, but slightly off, to compensate for the earth’s rotation.]


In addition, the amount of Coriolis force increases as the distance from the equator increases.  The sweet spot for adequate force is about 500 km [310 miles] from the equator, although formation outside of that is entirely possible.  It is physically difficult for formation to occur within 5° of the equator, because the amount of Coriolis force is simply too weak. Consequently, once a system rises above 20° latitude, the other above mentioned conditions become harder to maintain/achieve, so the ideal “Goldilocks Zone” for cyclogenesis remains between [5°- 20°].

Hurricane Movement Globally
Global tropical cyclone tracks between 1985-2005.  Photo courtesy of

So while the Atlantic Basin hurricane season is generally characterized by the Jun 01 – November 30 time frame, if the above conditions are met outside of that time frame, hurricane formation/intensification is entirely possible.  In fact, of all the Atlantic storms on record, 97% have formed within the above mentioned time frame.  So what about the other 3%?  The earliest known system has been re-analyzed to have occurred in January [1938] and the latest development has occurred in December [1954], towards the end of the month.  So while unlikely, it’s both historically and statistically conceivable.

Given the position of the earth and the amount of incoming solar radiation [insolation], ocean basins may indeed reach the required temperatures to support a breeding ground and if all other conditions are met, hurricane-a-typhoon-a-cyclone-a-comin’.



While 97% of storms form within the Jun 01-Nov 30 time frame, 6 major factors are required to produce/sustain cyclone development:

  1. SST’s > 79°F
  2. unstable atmosphere
  3. relative humidity > 60%
  4. existing disturbance
  5. adequate wind shear
  6. enough distance from the equator to experience adequate coriolis force

Stop playin’, read the whole article and learn a lil’ something!